Destructive Moisture

Manufacturers and companies selling metal entrance doors, among their shortcomings, only distinguish the appearance of small scratches and unaesthetic appearance. They "tactfully" hold back the most important drawback - the condensate.

Разрушительная влага

Destructive Moisture

Manufacturers and companies selling metal entrance doors, among their shortcomings, only distinguish the appearance of small scratches and unaesthetic appearance. They "tactfully" hold back the most important drawback - the condensate.

 

Condensation at the entrance door is much more dangerous than on the door to the kitchen, living room, bedroom, because:

  • The wires of the power supply system, the cable TV of the Internet and the telephone wire pass through the entrance opening, and the high humidity level caused by the condensate leads to a short circuit and the failure of the above communications.
  • The cold moisture of the door leaf surface and the dry warm air of the room will age the interior of the hallway, for example, under normal humidity, the wallpaper is kept for up to 10 years, and, due to condensation, peel off the next year;
  • In a private house, the front door can freeze to the door frame;
  • The metal leaf of any door model rusts several times faster.
  • High humidity in the hallway, the ideal environment for mold, fungi, and other harmful organisms that can spoil not only the interior trim, but also expensive shoes and outerwear.

 

How to deal with condensation?

The most popular methods are the installation of a double door with a distance of at least 15 cm or a ventilated vestibule, and where to find free space, if it isn’t provided for when building a house? Another way is to trim the door leaf and pour into the voids of the door frame mounting foam. As a result, the final cost of the product increases, on average, by 50%. In addition, with self-decoration, the finishing materials will not have the same adhesion to the fabric as in the finish by the manufacturer. However, the best way to deal with condensation is to purchase doors of good quality. This is a 100% manufacturer's warranty, and the installation will cost less than installing a cheap one, and then an additional payment for eliminating the manufacturer's shortcomings.

Which manufacturer to choose?

Metal entrance doors of Ukraine, along with competitive advantages of low price, reliability are extremely susceptible to condensation. An exception can be called the doors arma. The company "Arma", one of the few, pays great attention to combating this disastrous phenomenon. The absence of cold bridges, the covering of the door leaf, which prevents the accumulation of condensate - is the card of Arma.

Do not know which door to choose?

Get a free consultation

Our specialist will answer all your questions, and also help you find the door to your budget and needs.

Request for consultation


Order